236
Parameter description:
Port :
The port number for which the configuration below applies.
CoS :
Controls the default class of service.
All frames are classified to a CoS. There is a one to one mapping between CoS,
queue and priority. A CoS of 0 (zero) has the lowest priority.
If the port is VLAN aware, the frame is tagged and Tag Class. is enabled, then the
frame is classified to a CoS that is mapped from the PCP and DEI value in the tag.
Otherwise the frame is classified to the default CoS.
The classified CoS can be overruled by a QCL entry.
Note: If the default CoS has been dynamically changed, then the actual default CoS
is shown in parentheses after the configured default CoS.
DPL :
Controls the default drop precedence level.
All frames are classified to a drop precedence level.
If the port is VLAN aware, the frame is tagged and Tag Class. is enabled, then the
frame is classified to a DPL that is mapped from the PCP and DEI value in the tag.
Otherwise the frame is classified to the default DPL.
The classified DPL can be overruled by a QCL entry.
PCP :
Controls the default PCP value.
All frames are classified to a PCP value.
If the port is VLAN aware and the frame is tagged, then the frame is classified to the
To Next Page
Loading...
