LevelOne IGP-1271 - Page 59

52
Check to delete the entry. It will be deleted during the next save.
 Community
Indicates the community access string to permit access to SNMPv3 agent. The
allowed string length is 1 to 32, and the allowed content is ASCII characters from 33
to 126. The community string will be treated as security name and map a SNMPv1
or SNMPv2c community string.
 Source IP
Indicates the SNMP access source address. A particular range of source addresses
can be used to restrict source subnet when combined with source mask.
 Source Mask
Indicates the SNMP access source address mask
2-5.1.7.4 Users
The function is used to configure SNMPv3 user. The Entry index key is UserName. To
create a new UserName account, please check <Add new user> button, and enter the
user information then check <Save>. Max Group Number: 10.
Web Interface
To display the configure SNMP Users in the web interface:
1. Click SNMP, Users.
2. Specify the Privilege parameter.
3. Click Apply.
Figure 2-5.1.7.4: The SNMP Users Configuration