LIP-7004N User Guide
Your external calls may be subject to Call Time Restrictions, you will
receive a Call Warning Tone prior to disconnect.
NOTE—In the event of an emergency, assigned Emergency numbers
(ex., a 911 call) may be dialed from any station on the System,
regardless of a Station’s dialing restrictions (COS).
OPERATION
To place an external call:
ï‚· Lift the handset,
ï‚· Select/dial the CO/IP line/group,
ï‚· Dial the desired number.
3.2.2 Waiting for the next available CO/IP line
If all the lines connected to your system are busy, you will receive an All
Trunks Busy signal. You may request to be notified when a line
becomes free.
OPERATION
To activate a queue if the selected/dialed line is busy:
ï‚· Select/dial a busy CO/IP line,
ï‚· Dial 556(iPECS-Lik)/518(iPECS-MG),
ï‚· Return to an idle state by going on-hook; when the line becomes
available, the Station will be notified with ringing.
3.2.3 Account Codes: Tracking External calls for billing
In some cases, you or your company may desire to track calls for billing
or other purposes. You may enter an Account Code, which is output
from the system to a printer in the SMDR report. You may have an
Account Code Flex button (refer to Assigning features to Flex buttons).
OPERATION
To enter an Account Code before the call:
ï‚· Lift the handset,
ï‚· Dial 550,
ï‚· Dial the Account Code (1-12 digits),
ï‚· Press *, Intercom dial tone is heard,
ï‚· Place the CO/IP call as normal.
15