LIP-7016D/7024D User Guide
33
To respond to the current CLI message with a call:
ï‚· Press HOLD/SAVE.
In iPECS-MG
To review CLI Messages using a Flex button:
ï‚· Press LOG button of 3 soft key or the CALL LOG button, the Call
Log message information is displayed,
ï‚· Press Navigation Up/Down Key or â–¼ VOLUME â–² to scroll through Log
message wait information.(M means the missed call and ïƒ means
the answered call).
01 M 101
02 ïƒ 100
To return the current CLI message:
Press HOLD/SAVE.
6.3 Getting Voice Mail Messages
When callers are forwarded or recall to your Voice Mail Box, they can
leave a voice message. Your Voice Mail Box is part of the integrated
VMIM/VSF module, the iPECS Feature Server or an external Voice Mail
system.
These Voice Mail systems allow access to and management of the
received voice messages. While in your Mail Box, you have control of
your password and Mail Box greeting. In addition, you can remotely
control Call Forward for your station from the VMIM/VSF. You will need
to register an Authorization Code for your station to acce
ss the
VMIM/VSF Voice messages.
OPERATION
In iPECS-LIK
To retrieve Voice Mail locally using a Flex button:
ï‚· Press the VOICE MAIL Flex button,
ï‚· Dial your Mail Box number and corresponding password to receive
the ‘Number of Messages’ prompt,
ï‚· Dial desired option codes,
ï‚· At completion of session, hang-up to return to idle.
To retrieve Voice Mail locally using the CALL BACK button:
ï‚· Press the flashing CALL BACK button, the LCD shows the Message
Summary display,