To Next Page

To Previous Page

LIP-8004D User Guide

7.4 Wake-Up Alarm

iPECS supports an Alarm Clock for each station. You

can set the alarm clock to repeat daily or as a one-time

alarm.

When responding to the alarm by lifting the handset,

BGM will be provided.

To set the Wake Up Alarm clock:

 Press

TRANS/PGM,

 Dial 41(iPECS-LIK)/13(iPECS-MG) (Alarm Clock code).

 Dial hh/mm for time alarm should alert,

 Press # to have the alarm repeat daily,

 Press

HOLD/SAVE.

To erase Wake-Up:

 Press

TRANS/PGM,

 Dial 42(iPECS-LIK)/14(iPECS-MG) (Alarm Clock delete code)

 Press HOLD/SAVE .

7.5 Alarm/Door Bell

The system can monitor external Alarm or Door Bell

contacts:

Alarm Monitor—should the external contact activate, a

unique Alarm Ring signal and LCD display may be

received. To restart the monitor circuit, the external

contacts must be deactivated and the Alarm Ring signal

terminated.

Door Bell—a unique Door Bell Ring (single tone burst)

may be received each time the external contact is

activated. A system contact also can be assigned to act

as a Door Open contact.

NOTE—Contacts 3 & 4 are only available in the

iPECS -300 & 600. Contacts 1 is available in the

iPECS -MG.

To terminate the Alarm signal:

 Dial 565 (Alarm Stop code).

To activate the Door Open contacts:

 Lift the handset,

 Dial #* (Door Open code) and contact number 1 to 4.

LG-Ericsson LDP-7008 D User Manual

Questions and Answers: