To Next Page

To Previous Page

LIP-7008D User Guide

5.3 Broker Call: Switching between two calls

You may switch between the active call and a call on Hold, placing the

active call on Hold acting as a broker between two or more parties,

Broker Call. iPECS Phone users may ‘broker’ for multiple calls up to the

number of CO/IP line buttons.

OPERATION

To switch between two calls, Broker Call:

 Press the desired CO/IP line button.

5.4 Joining Multiple People in a Conference

You can establish a Conference with up to 3 parties (iPECS-Lik)/13

Party (iPECS-MG), or 24 parties when using a Multi-Party Conference

Interface Module (MCIM). The other parties in the Conference may be

internal or external.

A Conference can be placed on Hold and is subject to Hold Recall.

You may also

use the Conference operation to join 2 external parties in a

private conversation. This is an Unsupervised Conference, which is

not subject to the normal Hold Recall operation.

A CONF Flex button is required.

OPERATION

To establish a Conference:

 Establish call with one of the desired conference parties, and press

the CONF button when connected,

 Establish call with another conference party, and press the CONF

button when connected (repeat as needed to add more parties),

 Press CONF again to establish the conference.

To place a Conference on Hold:

 Press the HOLD/SAVE button; the CONF button LED will flash.

To retrieve the Conference from Hold:

 Press CONF.

To establish an Unsupervised Conference:

 Establish conference with two external parties,

 Press CONF.

To retrieve an Unsupervised Conference:

 Press CONF.

LG-Ericsson LDP-7008 D User Manual

Questions and Answers: