LIP-7024LD User Guide
７
2.3 Using a Bluetooth Wireless Headset
The iPECS LIP-7024LD may be equipped with the BTU (Bluetooth Unit)
option that lets you use a Wireless headset such as a Jabra BT-200, BT-
250 or Plantronics M3000. Using a headset permits you to move freely
around the phone within approximately 10 meters and maintain a
conversation. Before using the headset, the headset must be “paired”
with the BTU, and then the headset must be enabled for use. Operation
of the iPECS LIP-7024LD with the headset is the same as with the
Speakerphone; merely use the Speaker button to go ON and OFF-hook.
NOTE—during the pairing operation, the headset and phone should
be as close as possible but not more than 1 meter apart.
OPERATION
To pair the wireless headset to the BTU:
Press the TRANS/PGM button,
Dial 3,
Press the HOLD/SAVE button.
To enable/disable the wireless headset:
Press the TRANS/PGM button,
Dial 4,
Press the HOLD/SAVE button.
To unpair the headset:
Press the TRANS/PGM button,
Dial 3,
Press the HOLD/SAVE button.
To Next Page
Loading...
Need help?
General
