To Next Page

To Previous Page

LIP-8050V User Guide

6.3 Broker Call: Switching between two calls

You ma

y switch between the active call and a call on Hold,

placi

ng the active call on Hold acting as a broker between two or

more parties (Broker Call). iPECS Phone users may ‘broker’

for multiple calls up to the number of CO/IP line buttons.

6.4 Joining Multiple People in a Conference

You can establish a Conference with up to 3 parties, or 24

parties when using a Multi-Party Conference Interface Module

(MCIM). The other parties in the Conference may be internal or

external.

A Conference can be placed on Hold and is subject to Hold

Recal

You may also use the Conference operation to join 2 external

parties in a private conversation. This is an Unsupervised

Conference, which is not subject to the normal Hold Recall

operation.

To place a call on Hold:

 Press

HOLD/SAVE

To switch between two calls (Broker Call):

 Press the desired CO/IP line button.

To establish a Conference:

 Establish call with one of the desired conference parties,

 Select the Conf button,

 Establish call with the other conference party,

 Select the Conf button,

 Repeat above for additional parties

 Select the Conf

button again to establish the conference.

To establish a Conference:

 Establish call with one of the desired conference parties,

 Select the Conf button,

 Establish call with the other conference party,

 Select the Conf button,

 Repeat above for additional parties

 Select the Conf button again to establish the conference.

LG-Ericsson LDP-7008 D User Manual

Questions and Answers: