To Next Page

To Previous Page

LIP-7008D User Guide

5. Transfer, Conference & Other Call Handling

5.1 Call Transfer: Sending a call to a different destination

You can send an active call to another station or other resource of the

system, Call Transfer. You can screen the transfer with the receiving

party (Screened Call Transfer) or complete the transfer without

screening (Unscreened Call Transfer). Transferred calls, internal or

external, are placed in Transfer Hold, will receive MOH and will recall if

not answe

red in a timely manner.

If an Unscreened Transfer call encounters an error or DND, it

immediately recalls you.

DSS/BLF buttons may be employed to transfer calls.

OPERATION

To Transfer an active call:

 Press TRANS/PGM,

 Call receiving party,

 For Unscreened Call Transfer, hang-up,

 For Screened Call Transfer, at answer or Splash tone, announce

call.

5.2 Call Hold: Placing a call in a waiting state

You may place an active Internal or External call in one of several

holding states. In System Hold, other non-restricted stations may pick-

up the call. In Exclusive Hold, only the holding station may pick-up the

call.

The system is assigned a preferred hold type (System or Exclusive).

You may override this Hold Preference by pressing the HOLD/SAVE

button twice.

The LEDs for buttons assigned CO/IP line flash at distinctive rates for

the holding station and other iPECS Phone users.

There are also user operations such as pressing a DSS/BLF button that

will place a call in Automatic Hold.

Calls will remain in the held state for a period and then recall the user.

This Hold Recall is provided with a different ring signal. If not answered

in a timely manner, the Attendant will receive Attendant Hold Recall.

OPERATION

To place a call on Hold:

 Press HOLD/SAVE.

LG-Ericsson LDP-7008 D User Manual

Questions and Answers: