LIP-8008D User Guide
36
7.6 Power Fail Transfer
When AC power to the system fails, back-up operation
may be provided with back-up batteries or Power Fail
Transfer (PFT). When battery back-up is provided the
station will operate normally. When PFT is implemented,
an SLT is connected to a CO line by the system. This
SLT can be used as any normal SLT, providing service
while power is out.
7.7 System Voice Memo
The integrated Voice Mail modules incorporate several
Voice Memos to provide Station Users with general
information such as station number, date, time, and
feature status. Voice Memos can be heard over the
speaker or handset of the iPECS Phone and over the
handset for SLTs.
For the Station Status Memo, the following items are
reported:
ICM Signaling Mode (Handsfree/Tone/Privacy)
Station IP Address
Station Mac Address
Number of messages x (x: number of all message
waiting)
Wake-Up Time (hh:mm)
Do Not Disturb
Forwarded to station xxx
Forwarded to speed bin xxx
Queued CO/IP line xxx
Locked (Temporary COS)
COS x
NOTE—Only activated features are announced.
To hear Date & Time memo:
Dial the Voice Memo code (661 for iPECS-100, or *661 for iPECS-
300 & 600 & 1200, or 675+1 for iPECS-MG),
Date and Time memo is heard, “Date is May 2nd.Time is xx:xx pm”.
To hear Station Number Prompt:
Dial Voice Memo code (662 for iPECS-100, or *662 for iPECS-300
& 600 & 1200, or 675+2 for iPECS-MG),
The Station Number memo is heard, “This is station 150”.
To hear Station Settings:
Dial Voice Memo code (663 for iPECS-100, or *663 for iPECS-300
& 600 & 1200, or 675+3 for iPECS-MG),
Station Status Memo is heard.
To Next Page
Loading...
Need help?
General
