es
5.1 Responding to a Station Message Waiting Indication
Another station can leave a Station Message Waiting
indication when you do not answer or your phone is in
DND. A flashing MSG LED on the iPECS Phone
indic
ates a Message Waiting. As a further notification, a
Message Wait Reminder Tone can be provided. You
may respond with a call back.
To respond to your Station messages:
ï‚· Dial 557 to return messa
e.
5.2 Getting Voice Mail Messages
When callers are forwarded or recall to your Voice Mail
Box, they can leave a voice message. Your Voice Mail
Box is part of the integrated Voice Mail module, the
iPECS Feature Server or an external Voice Mail
system.
These Voice Mail systems allow access to and
management of the received voice messages. While in
your Mail Box, you have control of your password and
Mail Box greeting. In addition, you can remotely control
Call Forward for your station from the VMIM/VSF/VMIB.
You will need to register an Authorization Code for your
station to access VMIM/VSF/VMIB Voice messages.
To retrieve Voice Mail locally:
ï‚· Dial 557(iPECS-LIK)/523(iPECS-MG), or
ï‚· Press
CALL BACK, and Dial 2(iPECS-MG),
ï‚· After the prompt enter your station number and password,
ï‚· Dial desired option codes,
ï‚· At completion of session, hang-up to return to idle.
To access Voice Mail Box from a Remote Location:
ï‚· Lift the handset,
ï‚· Dial the telephone number of a DISA CO line assigned for
ans
wer by the Auto Attendant,
ï‚· Upon answer, dial #(iPECS-LIK)/523(iPECS-MG) to receive the
‘Mail Box & Password’ prompt,
 Dial the Mail Box and password to receive the ‘Number of
Messages’ prompt,
 Dial ‘*’ (iPECS-MG)
ï‚· Dial desired option codes,
ï‚· At com