LIP-8050V User Guide
74
9.6 Power Fail Transfer (PFT)
When AC power to the system fails, back-up operation may be
provided with back-up batteries or Power Fail Transfer (PFT).
When battery back-up is provided the station will operate
normally. When PFT is implemented, an SLT is connected to a
CO line by the system. This SLT can be used as any normal
SLT, providing service while power is out.
9.7 System Voice Memo
The integrated Voice Mail modules incorporate several Voice
Memos to provide Station Users with general information such
as station number, date, time, and feature status. Voice Memos
are heard over the iPECS Phone speaker and over the handset
for SLTs.
For the Station Status Memo, the following items are reported:
ICM Signaling Mode (Handsfree/Tone/Privacy)
Station IP Address
Station Mac Address
Number of messages x (x: number of all message waiting)
Wake-Up Time (hh:mm)
Do Not Disturb
Forwarded to station xxx
Forwarded to speed bin xxx
Queued CO/IP line xxx
Locked (Temporary COS)
COS x
NOTE—only activated features are announced.
To hear Date & Time memo:
Dial the Voice Memo code (661 for iPECS-100, or *661 for
iPECS-300 & 600 & 1200, or 671 + 1 for iPECS-MG),
Date and Time memo is heard, “Date is May 2nd.Time is xx:xx
pm”.
To hear Station Number Prompt:
Dial Voice Memo code (662 for iPECS-100, or *662 for iPECS-
300 & 600 & 1200, or 671 + 2 for iPECS-MG),
The Station Number memo is heard, “This is station 150”.
To hear Station Settings:
Dial Voice Memo code (663 for iPECS-100, or *663 for iPECS-
300 & 600 & 1200 , or 671 + 3 for iPECS-MG),
Station Status Memo is heard.
To Next Page
Loading...
Need help?
General
