LIP-8050V User Guide
45
4.8.2 Forwarding callers to a Text Message
Using an iPECS Phone, the system can be setup to return a
‘Text Message’ to internal callers. When calling your Station,
internal callers will automatically receive the selected message
or you can send a text message you select in response to an
internal call, Silent Text Message.
There are 11 Custom Display Messages each up to 24
characters. Ten can be assigned by the Attendant and one
assigned by you, see Station Speed Dial Character entry
ch
art.
In addition, there are ten fixed Pre-Defined Text Messages;
some allow auxiliary input for time, date, etc. (as shown in
message list).
Message Code
iPECS-Lik iPECS-MG
Text Message
01 1 LUNCH RETURN AT hh:mm
02 2
ON VACATION
RETURN AT DATE mm:dd
03 3 OUT OF OFFICE
04 4 RETURN AT TIME hh:mm
05 5
OUT OF OFFICE
RETURN UNKNOWN
06 6 CALL (enter up to 17 digits)
07 7 IN OFFICE STA xxxx
08 8
IN MEETING
RETURN AT TIME hh:mm
09 9 AT HOME
10 0 AT BRANCH OFFICE
00 * User Custom Message
11~20 Custom Message
# deactivate
To Next Page
Loading...
Need help?
General
