To Next Page

To Previous Page

LIP-7008D User Guide

OPERATION

In iPECS-Lik

To assign an AME button:

Ring Mode –

 TRANS/PGM + FLEX + 564 + 0 + HOLD/SAVE

Speaker Mode –

 TRANS/PGM + FLEX + 564 + 1 + HOLD/SAVE

To screen a call in the Ring mode:

 Press the flashing AME button, the caller’s voice is broadcast over

the station speaker and stored in the voice mailbox (in the Speaker

operation mode, broadcast is automatic).

To stop the voice broadcast and leave the caller in Voice Mail:

 Press the illuminated SPEAKER button.

To talk with the caller and record the conversation in Voice Mail:

 Press the illuminated MUTE button.

To answer the call and cancel the voice message recording:

 Press the illuminated AME button, the caller is connected and the

Voice Mail disconnected.

In iPECS-MG

To assign an AME button:

LED Blink Mode –

 TRANS/PGM + FLEX + 524 + 1 + HOLD/SAVE

Speaker Hearing Mode –

 TRANS/PGM + FLEX + 564 + 2 + HOLD/SAVE

3.4 Differential Ring Signals

When multiple phones in a small area ring, it can be difficult to tell which

are ringing. The iPECS Phone has 14 Ring Tones available for

differentiating ring from one phone to another. Four of the tones are

stored in the phone’s permanent memory; the remaining ten tones are in

the system’s memory. Four of these ten can be downloaded into the

phone’s memory for use as the 5

to 8

Ring Tone.

OPERATION

To download a Ring Tone from System to the phone’s memory:

 Press TRANS/PGM,

LG-Ericsson LDP-7008 D User Manual

Questions and Answers: