LIP-8050V User Guide
51
NOTE—In the event of an emergency, assigned Emergency
numbers (ex., a 911 call) may be dialed from any station in
the System, regardless of a Station’s dialing restrictions
(COS).
5.2.2 Waiting for the next available CO/IP
line
If all the lines connected to your system are busy, you will
receive an All Trunks Busy signal. You may request to be
notified when a line is available for use.
5.2.3 Account Codes: Tracking External calls for billing
In some cases, you or your company may desire to track calls
for billing or other purposes. You may enter an Account Code,
which is output from the system to a printer in the SMDR report.
You may have an Account Code Flex button (refer to
Assigning features to Flex buttons).
To place an external call:
ï‚· Lift the handset,
ï‚· Dial the CO/IP line/group,
ï‚· Dial the desired number.
To activate a queue if the selected/dialed line is busy:
ï‚· Select/dial CO/IP line; when the busy tone is returned, press
the
CALL
BACK
button,
ï‚· Return to an idle state by going on-hook; when the line is
available, the Station will be notified with ringing.
To enter an Account Code before the call:
ï‚· Lift the handset,
ï‚· Press the assigned
ACCOUNT CODE
button,
ï‚· Dial the Account Code (1-12 digits),
ï‚· Press *, Intercom dial tone is heard,
ï‚· Place the CO/IP call as normal.
To enter an Account Code during a call:
ï‚· Press the assigned
ACCOUNT CODE
button,
ï‚· Dial the Account Code (1-12 digits),
ï‚· Press *.