LIP-8040L User Guide
45
5.5 Call Park: Placing a call on Hold to Page
A user may
transfer an active CO/IP call to a special
holding location (Park Orbit), which can be accessed
easily from any station in the system. Typically, this
feature is used with Paging to notif
y the desired user of
a parked call.
Parked calls are subject to Hold Recall after the Call
Park timer.
In iPECS-LIK
To park an active external call:
ï‚· Press
TRANS/PGM,
ï‚· Dial the Park Orbit (601-610 for iPECS-100, or 601-619
for iPECS-300 & 600),
ï‚· Return to idle.
To retrieve a parked call:
ï‚· Lift the handset,
ï‚· Dial the Park Orbit.
In iPECS-MG
To set-up a Conference Room:
ï‚· Press the
TRANS/PGM button,
ï‚· Dial 54 to create a Conference Room,
ï‚· Dial the desired Conference Room number (571-579),
ï‚· If desired enter a password for the Conference Room
(up to 12 digits),
ï‚· Press
HOLD/SAVE to establish the Room.
To join a Conference Room:
ï‚· Lift the handset,
ï‚· Dial 571-579 (Conference Room entry code),
ï‚· Dial the Conference Room password.
To delete a Conference Room:
ï‚· Press the
TRANS/PGM button,
ï‚· Dial 55 (Conference Room delete code),
ï‚· Dial the Conference Room number (571-579),
ï‚· Dial the Conference Room password,
ï‚· Press HOLD/SAVE to delete the Conference Room.