To Next Page

To Previous Page

LIP-8004D User Guide

4.3 Broker Call: Switching between two calls

You may switch between the active call and a call on

Hold, placing the active call on Hold acting as a broker

between two or more parties, Broker Call. iPECS

Phone users may ‘broker’ for multiple calls up to the

number of CO/IP line buttons.

To switch between two calls, Broker Call:

 Press the desired CO/IP line button.

4.4 Joining multiple people in a Conference

You can establish a Conference with up to 3

parties(iPECS-LIK)/13 parties(iPECS-MG), or 24 parties

when using a Multi-Party Conference Interface Module

(MCIM)(iPECS-LIK). The other parties in the

Conference may be internal or external.

A Conference can be placed on Hold and is subject to

Hold Recall.

You ma

y also use the Conference operation to join 2

external parties in a private conversation. This is an

Unsupervised Conference, which is not subject to the

normal Hold Recall operation.

CONF Flex button is required.

To establish a Conference:

 Establish call with one of the desired conference parties,

 Press the

CONF Flex button,

 Establish call with the other conference party,

 Press the

CONF Flex button,

 Press the CONF Flex button again to establish the conference.

To place a Conference on Hold:

 Press the

HOLD/SAVE button.

LG-Ericsson LDP-7008 D User Manual

Questions and Answers: