LIP-7004N User Guide
To delete a Conference Room:
ï‚· Press the TRANS/PGM button,
ï‚· Dial 55 (delete Conference Room code),
ï‚· Dial the Conference Room number (571-579),
ï‚· Dial the Conference Room password,
ï‚· Press HOLD/SAVE to delete the Conference Room.
4.5 Call Park: Placing a call on hold to Page
A user may transfer an active CO/IP call to a special holding location
(Park Orbit), which can be accessed easily from any station in the
system. Typically, this feature is used with Paging to notify the desired
User of Call Park.
Parked calls
are subject to Hold Recall after the Call Park timer.
OPERATION
In iPECS-Lik
To park an active external call:
ï‚· Press TRANS/PGM,
ï‚· Dial the Park Orbit code (601-610 for iPECS-100 or 601-619 for
iPECS-300 & 600),
ï‚· Return to idle.
To retrieve a parked call:
ï‚· Lift the handset,
ï‚· Dial the Park Orbit code (601-610 for iPECS-100 or 601 for iPECS-
300 & 600).
In iPECS-MG
To park an active external call:
ï‚· Press TRANS/PGM,
ï‚· Dial the Park Orbit code (541)
ï‚· Dial the Park number (00-49)
ï‚· Return to idle.
To retrieve a parked call:
ï‚· Lift the handset,
ï‚· Dial the Park Orbit code (541).
ï‚· Dial the Park number(00-49).
24