EasyManuals Logo

LG-Ericsson LDP-7008 D User Manual

LG-Ericsson LDP-7008 D
686 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #636 background imageLoading...
Page #636 background image
LIP-8050V User Guide
40
Speaker mode(iPECS-Lik)/Speaker Hearing Mode(iPECS-
MG)—when the call is sent to the voice mailbox, the caller’s
voice is automatically broadcast over the speaker of your Phone.
You may terminate screening, leaving the caller in voice mail to
record a message, talk with the caller and record the
conversation in the mailbox, or answer the call and disconnect
the Voicemail. The AME feature is only available when using
the Voice Mail; a
M
UTE
and
AME
button should be programmed
(refer to Appendix A User Program Codes).
4.4 Differential Ring Signals
W
hen multiple phones in a small area ring, it can be difficult to
tell which are ringing. With the LIP-8050V, 12 ring tones are
available for differentiating one phone’s ringing from another.
These tones are stored on the phone’s permanent memory.
To screen a call in Ring mode/LED Blink Mode:
ï‚· Press the flashing
AME
button, the caller’s voice is broadcast
over the station speaker and stored in the voice mailbox (in the
Speaker mode, broadcast is automatic).
To stop the voice broadcast and leave the caller in Voice Mail:
ï‚· Press the illuminated
SPEAKER
button.
To talk with the caller and record the conversation in Voice Mail:
ï‚· Press the
MUTE
button.
To answer the call and cancel the voice message recording:
ï‚· Press the illuminated
AME
button, the caller is connected and
the Voice Mail disconnected.
To select a Ring Tone from phone memory (iPECS-Lik):
ï‚· Press the
TRANS/PGM
button,
ï‚· Dial 1 for Ring Tones,
ï‚· Dial 1 or 2 for Internal or External ring,
ï‚· Dial 01-12 for the desired tone number; a confirmation tone is
heard,
ï‚· Press
HOLD/SAVE
to make the selection.
To select a Ring Tone (iPECS-MG):
ï‚· Press the
TRANS/PGM
button,
ï‚· Dial 2 for Ring Tones,
ï‚· Dial 1 or 2 for Internal or External ring,
ï‚· Dial 1 for Ring Source
ï‚· Dial 1-4. The selected tone is heard.
ï‚· Press
HOLD/SAVE
to make the selection.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG-Ericsson LDP-7008 D and is the answer not in the manual?

LG-Ericsson LDP-7008 D Specifications

General IconGeneral
BrandLG-Ericsson
ModelLDP-7008 D
CategoryTelephone
LanguageEnglish

Related product manuals