LIP-7008D User Guide
18
To enter an Account Code during a call:
ï‚· Press the assigned ACCOUNT CODE button,
ï‚· Dial the Account Code (1-12 digits),
ï‚· Dial *.
4.2.4 Disabling dialing from your phone
You can temporarily ‘Lock’ your phone by activating Temporary COS,
which will deny all dialing from the phone. To deactivate Temporary
COS you must enter the station’s Authorization code.
OPERATION
In iPECS-Lik
To activate Temporary COS:
ï‚· Press TRANS/PGM,
ï‚· Dial User Program code 21,
ï‚· Press HOLD/SAVE.
To deactivate Temporary COS:
ï‚· Press TRANS/PGM,
ï‚· Dial User Program code 22,
ï‚· Dial your Authorization code,
ï‚· Press HOLD/SAVE.
In iPECS-MG
To activate Temporary COS:
ï‚· Press TRANS/PGM,
ï‚· Dial User Program code 31,
ï‚· Press HOLD/SAVE.
To deactivate Temporary COS:
ï‚· Press TRANS/PGM,
ï‚· Dial User Program code 32,
ï‚· Dial your Authorization code,
ï‚· Press HOLD/SAVE.
4.2.5 Temporarily overriding dialing restrictions at a phone
Override the dialing restrictions at any phone by activating Walking COS.
The Walking COS dialing restriction levels are applied for a single call