LIP-7004N User Guide
7.7 System Voice Memo
The integrated Voice Mail modules incorporate several Voice Memos to
provide Station Users with general information such as station number,
date, time, and feature status. Voice Memos are heard over the
speaker of the iPECS Phone and over the handset for SLTs.
For the Station Status Memo, the following items are reported:
ICM Signaling Mode (Handsfree/Tone/Privacy)
Station IP Address
Station Mac Address
Number of messages x (x: number of all message waiting)
Wake-Up Time (hh:mm)
Do Not Disturb
Forwarded to station xxx
Forwarded to speed bin xxx
Queued CO/IP line xxx
Locked (Temporary COS)
COS x
NOTE—Only activated features are announced.
OPERATION
To hear Date & Time memo:
Dial Voice Memo feature code (661 for iPECS-100 or *661 for
iPECS-300 & 600, 675 for iPECS-MG), date and time memo is
heard, “Date is May 2nd.Time is xx:xx pm”.
To hear Station Number Prompt:
Dial Voice Memo feature code (662 for iPECS-100 or *662 for
iPECS-300 & 600), the station number memo is heard, “This is
station 150”.
To hear Station Settings:
Dial Voice Memo feature code (663 for iPECS-100 or *663 for
iPECS-300 & 600), Station Status Memo is heard.
7.8 Hot Desk
iPECS phones in the system may be assigned for Hot Desk operation.
These Hot Desk phones let you log-on and use the Hot Desk phone as if
it were your station. Once logged-on, the Hot Desk station will take on
the attributes assigned to your station number and you can make calls as
normal. When logged-out, calls to your station are forward to the
destination you chose.
32
To Next Page
Loading...
Need help?
General
