LIP-8004D User Guide
3.3.4 Using Dial by Name and Entering Your Name (iPECS-
MG)
Dial by Name employs three different Directories:
Private directory (Station Speed dial), Public Directory
(System Speed dial), or Intercom directory.
NOTE—To allow others to contact you via the
Intercom directory, you must enter a name for your
station (up to 16 characters):
To place a call using Dial by Name:
ï‚· Press the SPEED button twice,
ï‚· Dial the desired directory, 1: Private directory, 2: Public
directory, 3: Intercom directory, the LCD will display the names
in alphabetical order,
ï‚· Scroll using the Navigation up/down keys.
ï‚· Press
HOLD/SAVE to place the call.
To enter your station user name:
ï‚· Press the TRANS/PGM button,
ï‚· Dial 12 (Station User Name code),
ï‚· Enter the Name, up to 16 characters,
ï‚· Press
HOLD/SAVE.
22