LIP-7008D User Guide
27
ï‚· Dial 571-579 (Conference Room entry code),
ï‚· Dial the Conference Room password.
To delete a Conference Room:
ï‚· Press the TRANS/PGM button,
ï‚· Dial 55 (delete Conference Room code),
ï‚· Dial the Conference Room number (571-579),
ï‚· Dial the Conference Room password,
ï‚· Press HOLD/SAVE to delete the Conference Room.
5.5 Call Park: Placing a call on hold to Page
A user may transfer an active CO/IP call to a special holding location
(Park Orbit), which can be accessed easily from any station in the
system. Typically, this feature is used with Paging t
o notify the desired
User of Call Park.
Parked calls are subject to Hold Recall after the Call Park timer.
OPERATION
In iPECS-Lik
To park an active external call:
ï‚· Press TRANS/PGM,
ï‚· Dial the Park Orbit code (601-610 for iPECS-100 or 601-619 for
iPECS-300 & 600),
ï‚· Return to idle.
To retrieve a parked call:
ï‚· Lift the handset,
ï‚· Dial the Park Orbit code (601-610 for iPECS-100 or 601 to 619 for
iPECS-300 & 600).
In iPECS-MG
To park an active external call:
ï‚· Press TRANS/PGM,
ï‚· Dial the Park Orbit code (541)
ï‚· Dial the Park number (00-49)
ï‚· Return to idle.
To retrieve a parked call:
ï‚· Lift the handset,
ï‚· Dial the Park Orbit code (541).
ï‚· Dial the Park number(00-49).