LIP-7008D User Guide
1
1. Introduction
1.1 General
Your telephone is connected to an advanced technology highly versatile
fully featured telecom system designed to make office communications
easy and productive. Employing state of the art Voice over Internet
Protocol (VoIP) technology, voice and data converge on a single IP
packet network. Because each iPECS Phone is an IP appliance, it can
be moved easily throughout the office LAN and maintain normal
operation.
1.2 Feature Information
We have taken every effort to make this user guide simple and
straightforward. The guide starts with the simpler operations of the
iPECS Phone Speakerphone, moves to receiving and placing calls and
then to more advanced features. Each section includes a brief and basic
description of each feature and step-by-step operations
The operations shown in this guide use the system’s base default
Numbering Plan. Your Numbering Plan may be different. Some features
may not be available for you to access or may be subject to certain
limitations based on the set-up of the system
Under certain operation conditions this equipment cannot be relied upon
to make emergency calls. Alternative arrangements should be made for
access to the emergency services.
1.3 Feature Groupings
Features have been divided into groups, Receiving calls, Placing calls
etc. Within each group, features are arranged according to the difficulty
of operation and frequency of use. In some cases, a feature must be
assigned to a Flex button. Every effort has been taken to divide the
features into a logical and consistent sequence so that features can be
quickly located.
To Next Page
Loading...
Need help?
General
