To Next Page

To Previous Page

LIP-7004N User Guide

If the desired Page Zone is busy, the User can elect to be recalled when

their turn comes in the queue. Users can also request a paged party

answer the Page using Meet-Me Paging. In this case, the paged party

may answer the page from any phone in the system by dialing the Meet-

Me code.

OPERATION

To make a page:

 Lift the handset,

 Dial the desired Page zone,

 If assigned, after page warning tone, make announcement.

To queue for a page when busy is received:

 Dial 556,

 Replace the handset returning to idle.

To answer a Meet-me-Page:

 Lift the handset.

 Dial the Meet-Me-Page code 544(iPECS-Lik)/546(iPECS-MG).

7.3 Push-To-Talk (PTT) Page

iPECS Phones can be assigned as a member of one or more of the

system’s nine Push-To-Talk (PTT) page groups. Users separately log-in

or log-out of any one or all PTT groups to which the phone is assigned.

Once logged in, place or receive one-way page announcements to/from

other users who are logged in to the same PTT group.

OPERATION

To log-in to a PTT group:

 Dial #0(iPECS-Lik)/538(iPECS-MG), the PTT Log-in/out code.

 Dial the desired PTT group number (1-9 or 0 for all groups).

To log-out of the PTT group(s):

 Dial #0 (iPECS-Lik)/538(iPECS-MG), the PTT Log-in/out code.

 Press the * key.

To place a page to the active PTT group:

 Press and hold the PTT Flex button.

 After confirmation tone make page announcement.

7.4 Wake-Up Alarm

iPECS supports an Alarm Clock for each station. You can set the alarm

clock to repeat daily or as a one-time alarm.

LG-Ericsson LDP-7008 D User Manual

Questions and Answers: