To Next Page

To Previous Page

LIP-7016D/7024D User Guide

Once logged in, place or receive one-way page announcements to/from

other users who are logged in to the same PTT group.

OPERATION

To log-in to a PTT group:

 Dial #0 (iPECS-Lik)/538(iPECS-MG),

 Dial the desired PTT group number (1-9 or 0 for all groups),

To log-out of the PTT group(s):

 Dial #0 (iPECS-Lik)/538(iPECS-MG), the PTT Log-in/out code,

 Press the * key.

To place a page announcement to the active PTT group:

 Press and hold the PTT Flex button,

 After confirmation tone, make page announcement.

8.5 Wake-Up Alarm

iPECS supports an Alarm clock for each station in the system. The

alarm clock can be set to repeat daily or as a one-time alarm.

When responding to the alarm by lifting the handset, BGM will be

provided.

OPERATION

To set the Wake Up Alarm clock:

 Press TRANS/PGM,

 Dial the Station User Program code 41(iPECS-Lik)/13(iPECS-MG),

 Dial 2-digit hour and minute for alerting,

 For a daily (repeating alarm), dial #,

 Press HOLD/SAVE.

To erase Wake-Up:

 Press TRANS/PGM,

 Dial the Station User Program code 42(iPECS-Lik)/14(iPECS-MG),

 Press HOLD/SAVE.

8.6 Alarm/Door Bell

The system can monitor external Alarm or Door Bell contacts:

Alarm Monitor—should the external contact activate, a unique Alarm

Ring signal and LCD display may be received. To restart the monitor

circuit, the external contacts must be deactivated and the Alarm Ring

signal terminated.

LG-Ericsson LDP-7008 D User Manual

Questions and Answers: