To Next Page

To Previous Page

LIP-7024LD User Guide

１０

To assign an AME button:

Ring Mode –

 TRANS/PGM + FLEX + 564 + 0 + HOLD/SAVE

Speaker Mode –

 TRANS/PGM + FLEX + 564 + 1 + HOLD/SAVE

To screen a call in Ring mode:

 Press the flashing AME button, the caller’s voice is broadcast over the

station speaker and stored in the voice mailbox (in the Speaker

mode, broadcast is automatic).

To stop the voice broadcast and leave the caller in Voice Mail:

 Press the illuminated SPEAKER button.

To talk with the caller and record the conversation in Voice Mail:

 Press the Mute Soft button.

To answer the call and cancel the voice message recording:

 Press the illuminated AME button, the caller is connected and the

Voice Mail disconnected.

In iPECS-MG

To assign an AME button:

LED Blink Mode –

 TRANS/PGM + FLEX + 524 + 1 + HOLD/SAVE

Speaker Hearing Mode –

 TRANS/PGM + FLEX + 564 + 2 + HOLD/SAVE

3.4 Differential Ring Signals

When multiple phones in a small area ring, it can be difficult to tell which

are ringing. The iPECS Phone has 14 Ring Tones available for

differentiating ring from one phone to another. Four of the tones are

stored in the phone’s permanent memory; the remaining ten tones are in

the system’s memory. Four of these ten can be downloaded into the

phone memory for use as the 5

to 8

Ring Tone.

OPERATION

To download a Ring Tone from System memory:

 Press TRANS/PGM,

 Dial 1 for Ring Tones,

 Dial 5 for Ring Tone download,

 Dial the phone’s memory location to receive the tone (5-8),

 Dial tone number 0-9, tone is heard,

 Press HOLD/SAVE to download.

LG-Ericsson LDP-7008 D User Manual

Questions and Answers: