LG-Ericsson LDP-7008 D User Manual

LIP-8050V User Guide
63
6.5 Call Park: Placing a call on Hold to Page
A user may transfer an active CO/IP call to a special holding
location (Park Orbit), which can be accessed easily from any
station in the system. Typically, this feature is used with Paging
to notif
y the desired user of a parked call.
Parked calls are subject to Hold Recall after the Call Park timer.
To place a Conference on Hold:
 Press the
HOLD/SAVE
button.
To retrieve the Conference from Hold:
 Select the Conf
button.
To establish an Unsupervised Conference:
 Establish conference with external parties,
 Select the Conf
button,
 Hang-up the handset.
To retrieve an Unsupervised Conference:
 Lift the handset,
 Select the Conf button.
To park an active external call:
 Press
TRANS/PGM
,
 Dial the Park Orbit (601-610 for iPECS-50 & 100, 601-619 for
iPECS-300, 601-699 for iPECS-600, 6001-6200 for iPECS-
1200),
Dial the 541 (Call Parking Location Code) and 00-49(Park
Orbit) for iPECS-MG
 Return to idle.
To retrieve a parked call:
 Lift the handset,
 Dial the Park Orbit (iPECS-Lik)
Dial the 541 (Call Parking Location Code) and 00-49(Park
Orbit) for iPECS-MG

LG-Ericsson LDP-7008 D Specifications

General

Brand	LG-Ericsson
Model	LDP-7008 D
Category	Telephone
Language	English