To Next Page

To Previous Page

LIP-7004N User Guide

9. Setting Features & Flex buttons

9.1 Entering Station Program Data

A special code set is available for iPECS Phone users to assign certain

attributes such as Authorization Codes (Passwords). After entering the

User Program mode, you dial the codes to select the attribute and

setting. Once selected, the setting is saved. A list of the User Program

codes, the feature/function and any input required are given in Appendix

OPERATION

To assign user programmable station attributes:

 Press TRANS/PGM,

 Dial desired User Program codes shown in Appendix B,

 Press HOLD/SAVE.

9.2 Assigning features to Flex buttons

You may assign features and functions to the Flex buttons on your

iPECS Phone. If allowed, you may even assign CO/IP lines to the Flex

buttons. Flex buttons may be assigned for most features providing One-

Touch feature activation (e.g., a Flex button may be assigned to access

the Account Code feature and may include the Account code digits, as a

ONE-TOUCH ACCOUNT CODE button).

Features that may be assigned to a Flex button include:

DSS/BLF – Enter station number,

Speed Dial – Enter Station/System Speed dial bin number,

Flex Numbe

ring Plan – Enter Flex Numbering Plan code, see Appendix

User Program Code – Press TRANS/PGM and enter a User Program

code, see Appendix B, or

CO/IP line – Enter the CO/IP line or group number.

OPERATION

To assign a feature to a Flex button:

 Press TRANS/PGM,

 Press the desired Flex button,

 Dial desired code and required inputs. For User Program codes,

first press the TRANS/PGM,

 Press HOLD/SAVE.

LG-Ericsson LDP-7008 D User Manual

Questions and Answers: