LG-Ericsson LDP-7008 D User Manual

LIP-8050V User Guide
73
9.4 Push-To-Talk (PTT) Page
iPECS Phones can be assigned as a member of one or more of
the system’s nine Push-To-Talk (PTT) page groups. Users
separately log-in or log-out of any one or all PTT groups to
which the phone is assigned. Once logged in, place or receive
one-way page announcements to/from other users who are
logged in to the same PTT group.
9.5 Alarm/Door Bell
T
he system can monitor external Alarm or Door Bell contacts:
Alarm Monitor—should the external contact activate, a unique
Alarm Ring signal and LCD display may be received. To restart
the monitor circuit, the external contacts must be deactivated
and the Alarm Ring signal terminated.
Door Bell—a unique Door Bell Ring (single tone burst) may be
received each time the external contact is activated. A system
contact also can be assigned to act as a Door Open contact.
NOTE—Contacts 3 & 4 are only available in the iPECS-300,
600 and 1200.
Contact 1 is available in iPECS-MG.
To log-in to a PTT group:
 Dial #0(iPECS-Lik)/538(iPECS-MG), the PTT Log-in/out code,
 Dial the desired PTT group number (1-9 or 0 for all groups),
To log-out of the PTT group(s):
 Dial #0(iPECS-Lik)/538(iPECS-MG), the PTT Log-in/out code,
 Press the * key.
To place a page announcement to the active PTT group:
 Press and hold the
PTT
button,
 After confirmation tone, make page announcement.
To terminate the Alarm signal:
 Dial 565 (Alarm Stop code).
To activate the Door Open contacts:
 Lift the handset,
 Dial Door Open code, #* and contact number 1-4.

LG-Ericsson LDP-7008 D Specifications

General

Brand	LG-Ericsson
Model	LDP-7008 D
Category	Telephone
Language	English