LIP-8004D User Guide
your Station; after you answer the callback, the system
will call the previously busy station.
If you are the Attendant or Secretary, you may activate
Intrusion. You may also use Step Call; dial the next
station by dialing just the last digit of the Intercom
number.
To Camp-On (wait off-hook) for a busy station:
ï‚· While placing a call to a busy station, dial * and wait for an
answer.
To Callback (wait on-hook) for a busy station:
ï‚· While placing a call to a busy station, press the
CALL BACK
button and hang-up.
To make a Voice Over announcement to a busy station:
ï‚· Dial #, and after the Splash tone is heard, begin speaking.
3.1.2 To leave a Message Wait
If
the called user does not answer or is in DND mode,
you may leave a Message Wait. The called user will
receive a Message Wait indication with LED or ICON.
To activate Message Waiting:
ï‚· Press the CALL BACK .
3.2 External Calls
3.2.1 Placing external CO/VoIP calls
External calls are placed on CO/IP lines. These ‘lines’
are accessed either using a button on the iPECS Phone
assigned as a CO/IP line or using dial codes. The
CO/IP lines are grouped for different types of calls, local,
long distance, etc. Using the CO/IP line group code,
you will be able to access any line from the group. A
Flex button on the iPECS Phone assigned as a
LOOP
button lets you access a line from a group. Dial codes
for access to CO/IP lines are:
Individual CO/IP line access
88 + Line number (01-42 for iPECS-100, 001-200 for
iPECS-300 & 600).
15
To Next Page
Loading...
Need help?
General
