The 3 Soft Buttons are located on the bottom of the LCD display. The function of each button
changes, subject to call status and progress. The current functions are displayed on the LCD
screen, directly above each button. For example, if the user calls a busy extension, busy tone will
be heard and the busy status displayed. The LCD screen will display the busy message along with
the different options available - “Call Back”, “Flash” , “Call Wait” , “Camp On” and “Pilot Hunt”. By
pressing the relevant button the desired feature is activated.
3 Soft Button
Navigation Button
In some instances, more than 3 current functions are available to the user, and this is indicated by
the appearance of a left () or right () arrow in the LCD screen, (see below). By pressing the
navigation key (located below the volume button), in the direction corresponding to the arrow, any
additional functions will be displayed.
BUSY : 100
12 OCT 09 12:00 pm
C-BACK FLASH
STATION 100 (T)
12 OCT 09 12:00 pm
LOG DIR REDIAL
STATION 100 (T)
12 OCT 09 12:00 pm
PICKUP FWD DND
3 Soft Buttons & Navigation Button
8
BUSY : 100
12 OCT 09 12:00 pm
C-WAIT CAMPON P-HUNT
To Next Page
Loading...
Need help?
General
