LIP-7024LD User Guide
21
ï‚· Press TRANS/PGM,
ï‚· Dial User Program code 31,
ï‚· Press HOLD/SAVE .
To deactivate Temporary COS:
ï‚· Press TRANS/PGM,
ï‚· Dial User Program code 32,
ï‚· Dial your Authorization code,
ï‚· Press HOLD/SAVE .
4.2.5 Temporarily override dialing restrictions at a phone
Override the dialing restrictions at any phone by activating Walking COS.
The Walking COS dialing restriction levels are applied for a single call
only. For multiple calls, you will need to reactivate Walking COS or
use the Flash button to regain CO/IP dial-tone.
OPERATION
In iPECS-Lik
To activate Walking COS:
ï‚· Press TRANS/PGM,
ï‚· Dial User Program code 23,
ï‚· Dial your Authorization Code (Station number and password),
ï‚· Place call as normal.
In iPECS-MG
To activate Walking COS:
ï‚· Press TRANS/PGM,
ï‚· Dial User Program code 33,
ï‚· Dial your Authorization Code (Station number and password),
ï‚· Place call as normal.
4.3 Using Automated Dialing
4.3.1 Using Last Number Redial (LNR)
The last number dialed on an external call is automatically saved in the
Last Number Redial (LNR) buffer. For users of an iPECS Display
Phone, the system will store the numbers dialed on the last ten calls.
OPERATION
To dial the Last Number for an external call:
ï‚· Lift the handset,