LIP-7024LD User Guide
13
ï‚· Dial the destination number.
ï‚· Press HOLD/SAVE (iPECS-MG)
To deactivate Call Forward from your phone:
ï‚· Lift the handset.
ï‚· Press the Fwd Soft button.
ï‚· Dial #.
To activate Call Forward for your phone from a different phone (Call
Forward, Remote):
ï‚· Lift the handset,
ï‚· Press the Fwd Soft button,
ï‚· Dial 0 (Remote Call Forward code),
ï‚· Dial your Authorization code (Station number & Password),
 Dial the ‘type of forward’ code 1-4,
ï‚· Dial the destination number.
ï‚· Press HOLD/SAVE (iPECS-MG)
To deactivate Call Forward, Remote:
ï‚· Lift the handset,
ï‚· Press the Fwd Soft button,
ï‚· Dial 0 (Remote Call Forward code),
ï‚· Dial your Authorization code (Station number & Password),
ï‚· Press the # key.
3.8.2 Forwarding calls to an external number
Forward calls to an external destination; calls can be forwarded from an
internal station or a remote location. You may define the conditions or
‘type of forward’ as listed below:
1: Unconditional—all calls to the station, except recalls, are
forwarded.
2: Busy—Immediately forwards all calls to the station, except recalls,
when station is busy.
3: No Answer—forwards all calls to the station, except recalls, when
the station does not answer within the No Answer timer.
4: Busy/No Answer—forwards calls if the station is busy or does not
answer within the No Answer timer.
When you forward calls from a different station or a remote location, you
may need to enter your Authorization Code.
In addition, from a remote
location, you must access the system through a DISA enabl
ed CO line.
OPERATION
In iPECS-Lik
To activate Call Forward, Off Premise (forward to an external number)
from your phone: