LIP-7024LD User Guide
15
ï‚· Press HOLD/SAVE (iPECS-MG)
ï‚· Replace the handset, return to idle.
3.8.3 Forwarding callers to a Text Message
Using an iPECS Phone, the system can be setup to return a ‘Text
Message’ to internal callers. When calling your Station, internal callers
will automatically receive the selected message or you can send a text
message you select in response to an internal call, Silent Text Message.
There are 11 Custom Display Messages each up to 24 characters.
Ten can be assigned by the Attendant and one assigned by you.
In addition, there are ten fix Pre-Defined Text Messages; some allow
auxiliary input for time, date, etc. (as shown in message list).
In iPECS-LIK
Message 01: LUNCH RETURN AT hh:mm
Message 02: ON VACATION
RETURN AT DATE mm:dd
Message 03: OUT OF OFFICE
RETURN AT TIME hh:mm
Message 04: OUT OF OFFICE
RETURN AT DATE mm:dd
Message 05: OUT OF OFFICE
RETURN UNKNOWN
Message 06: CALL (enter up to 17 digits)
Message 07: IN OFFICE STA xxxx
Message 08: IN MEETING
RETURN AT TIME hh:mm
Message 09: AT HOME
Message 10: AT BRANCH OFFICE
In iPECS-MG
1: LUNCH RETURN AT hh:mm
2: ON VACATION
RETURN AT DATE mm:dd
3: OUT OF OFFICE
RETURN AT TIME hh:mm
4: OUT OF OFFICE
RETURN AT DATE mm:dd
5: OUT OF OFFICE
RETURN UNKNOWN
6: CALL (enter up to 17 digits)
7: IN OFFICE STA xxxx
8: IN MEETING
RETURN AT TIME hh:mm
9: AT HOME