LG-Ericsson LDP-7008 D User Manual

LIP-7008D User Guide
20
 Press SPEED.
 Dial #
To store a number in the Save Number Dial:
 While on an outgoing external call, press SPEED twice.
4.3.3 Using System Speed Dial Numbers
The iPECS-100 system has memory allocated for 800 System Speed
Dial numbers (bins 200-999), for iPECS-MG 100(2000-2999). The
iPECS-300 & 600, iPECS-MG 300 systems each have memory allocated
for 3000 System Speed Dial numbers (bins 2000-4999). You may, if
allowed, use the System Speed Dial to dial frequently called numbers.
In some cases, these numbers are divided into groups called System
Speed Zone Groups. In this case, you may access some numbers and
not others and your dialing restrictions may be invoked.
Only an Attendant can assign System Speed Dial numbers.
OPERATION
To place a call using System Speed Dial:
 Lift the handset, or press the Speaker button,
 Press Speed ,
 Dial the desired System Speed Dial bin number (200-999 for iPECS-
100, 2000-4999 for iPECS-300 & 600, 2000-2999 for iPECS-MG100,
2000-4999 for iPECS-MG300).
4.3.4 Using and Entering Station Speed Dial Numbers
Each station in the iPECS-100 is allocated memory for 20 Station
Speed Dial numbers (bins 00-19) each up to 48 digits. The iPECS-300
& 600 support 100 Station Speed Dial numbers (bins 000-099). The
iPECS-MG 100 & 300 each support 50 Station Speed Dial numbers
(bins (00-49). These numbers are entered at the user’s station and may
include several ‘special’ instructions. Special instructions and the
corresponding button are:
‘#’ – Pause, system will momentarily stop dialing.
FLASH as 1
st
digit – activate dial tone detect.
FLASH not as 1
st
digit – the system will generate a flash on the CO
line.
CALL BACK as 1
st
digit – Send digits as ISDN Keypad Facility
message.
‘*’ as 1
st
digit - Display Security, the stored number will not be
displayed when used.

LG-Ericsson LDP-7008 D Specifications

General

Brand	LG-Ericsson
Model	LDP-7008 D
Category	Telephone
Language	English