LIP-8040L User Guide
63
9.2.2 Using ISDN Supplementary Services
ISDN service p
roviders may incorporate features similar
to those of Centrex. These ISDN Supplementary
services are provided on a subscription basis, and as
with Centrex, are accessed using the Flash b
utton on an
iPECS phone.
Using supplementary services an ISDN line can be
placed on Hold and a second call placed on the line.
You may then alternate between the two held calls
(Broker Call) using the hold button. An ISDN line
conference can be established using the Flash
and Conf
Soft buttons. A conference can also be placed on hold.
9.2.3 Activating ISDN Caller ID Restriction
iPECS Pho
ne users can restrict the transmission of
Caller ID to the far-end. This may be a subscription
service of your carrier. Separate Flex buttons are
required to activate outgoing, Connected Line (COL),
and incoming, Calling Line ID (CLID) restriction.
To activate Keypad Facility operation:
ï‚· Press the programmed KEYPAD FACILITY button to switch
to keypad mode,
ï‚· Dial as desired.
To deactivate Keypad Facility operation:
ï‚· Press
KEYPAD FACILITY,
ï‚· OR
ï‚· Press a Feature or Flex button.
While on an ISDN CO line, to access ISDN Supplementary
services:
ï‚· Press Flash,
ï‚· Press HOLD/SAVE, Conf, or CO line button to activate
the desired feature.
To restrict Caller ID:
ï‚· Lift the handset,
ï‚· Press programmed CLIR/COLR button to place call.