LIP-7016D/7024D User Guide
5
2. iPECS Phone LCD, Speakerphone & Related Features
2.1 LCD Operation
The Liquid Crystal Display (LCD) of the iPECS LIP-7016D and LIP-
7024D has three lines of 24 characters each. The LCD is used to
convey information to you. It provides the date, time and station
number on the display while idle. It will also provide called/calling
name/number display, feature status and an interactive menu to guide
you through feature access and User Program sel
ections.
2.2 Using the Speakerphone
Activate the iPECS Speakerphone at any time (except for Paging) in
place of lifting the handset to receive or place calls. Place calls using
On-hook dialing with the Speakerphone.
In addition, you may switch between the handset and Speakerphone
during a call. By keeping the handset Off-hook, the Group Listen
feature is activated, which provides incoming audio over the speaker
with outgoing audio from the handset. This permits a local ‘group’ to
listen to both sides of the conversation without interfering with the
conversation.
While in a conversation using the Speakerphone, Mute the microphone
using the Mute
Soft button. When Mute is active, the Mute Soft button
toggles to Speak
, which is used to turn off Mute.
With Auto Speaker Select, activating or accessing a feature by pressing
its button will activate the Speakerphone automatically.
When using a Headset, the SPEAKER button controls the ON/OFF-hook
state for the phone.
OPERATION
To activate the Speakerphone to answer or place a call:
ï‚· Press SPEAKER, the phone goes off-hook with audio from the
speaker and to microphone.
To control the volume of the Speakerphone or handset:
ï‚· Press the â–¼ VOLUME â–² button.
To Mute the microphone:
ï‚· Select the Mute Soft button.
To turn off Mute (turn the microphone ON):
ï‚· Press the Speak Soft button.
To activate Group Listen while on an active handset call:
ï‚· Press the SPEAKER button.
To Next Page
Loading...
Need help?
General
