9. Intercom Talk
CALL FROM 104
12 OCT 09 12:00 pm
TRANS CONF MUTEïƒ
TRANS : Press to transfer an incoming call to another
station.
CONF : Press to initiate a conference call.
MUTE : Press to mute the handset, speakerphone,
or headset microphone. Press the [SPEAK]
button to re- activate microphone.
10. CO Dialing
Basic Function
11. CO Line Busy
BUSY
FLASH
FLASH : If you wish to terminate a call and make
another call, press [FLASH] to re-seize dial
tone.
STATION 100 (T)
LINE 08 00:00:03
TRANS CONF MUTEïƒ
Press programmed flexible button for CO.
(CO can be accessed by dialing CO access code 9 or
individual CO access code)
Dial telephone number.
10.1 Manual Dialing
SPD_NO LAST(*) SAVE(#)
BACK SEARCH ADD
10.2 Speed Dialing
Press [SPEED] button.
Press SEARCH to search speed dial by name
>ABC : 9123456789
[SEARCH] :
EDIT ERASEïƒ
Dial number to seach name
EDIT : Press EDIT to edit speed bin
ERASE : Press ERASE to delete speed bin
>ABC : 9123456789
[SEARCH] :
 BACK SEND EXIT
The following CO access codes ‘9’, individual CO access code can be changed by Admin
Programming 115 depending on the user’s needs.
13
CALL FROM 104
12 OCT 09 12:00 pm
ACNR FLASH PRIVACY
ACNR : Press to set automatic called number redial.
FLASH : Press to disconnect the line and re-seize.
PRIVACY : Press to use privacy mode.
BACK: Press BACK to go to privious menu
SEND : Press SEND to make a call
EXIT : Press EXIT to exit Speed Menu