LIP-7024LD User Guide
44
ï‚· Dial the desired extension, the call is transferred and the mobile
phone returns to idle,
NOTE—The mobile may reconnect to the transfer by pressing the #
key.
In iPECS-MG
To activate a registered mobile phone from the user’s station:
ï‚· Press the TRANS/PGM button.
ï‚· Dial 51.
ï‚· Select Mobile Index 1 or 2
ï‚· 1 to activate, 0 to deactivate,
ï‚· Press the HOLD/SAVE button.
To register a mobile phone number:
ï‚· Press the TRANS/PGM button,
ï‚· Dial 52.
ï‚· Select Mobile Index 1 or 2.
ï‚· Dial the mobile phone number with CO Access code.
ï‚· Press the HOLD/SAVE button.
To place a call from the mobile extension using the iPECS:
ï‚· Dial the ISDN DID number of the station, the system will check the
Caller Id, answer the call and the user will receive intercom dial tone,
ï‚· Place internal or external iPECS call as normal.
To Transfer a call from the mobile extension using the iPECS:
ï‚· Dial the mobile flash digit * while on an iPECS call,
ï‚· Dial the desired extension, the call is transferred and the mobile
phone returns to idle,
ï‚·
NOTE—The mobile extension may reconnect to the transfer by
pressing the mobile flash digit(*).