LIP-8008D User Guide
T
o Transfer a call from the mobile extension using the iPECS:
Dial the mobile flash digit “*” while on an iPECS call,
Dial the desired extension, the call is transferred and the
mobile phone returns to idle.
To place a call from the mobile extension using the iPECS System:
Dial the ISDN DID number of the station; the system will check
the Caller ID and answer the call. The user then will receive
intercom dial tone,
Place internal or external iPECS call as normal.
In iPECS-MG
To re
gister a mobile phone number:
Press the
TRANS/PGM button,
Dial 51,
Select Mobile Index 1 or 2,
1 to activate, 0 to deactivate,
Press the
HOLD/SAVE button.
To activate a registered mobile phone from the user’s station:
Press the
TRANS/PGM button,
Dial 52,
Select Mobile Index 1 or 2,
Dial the mobile phone number with CO Access code,
Press the
HOLD/SAVE button.
NOTE—The mobile extension may reconnect to the
transfer call by pressing the mobile flash digit(*).
32