LIP-8012D & LIP-8024D User Guide
3
iPECS LIP-8024D Diagram
1.5 LIP-8012D & 8024D Phone Installation
LIP Phones and Consoles can be connected to any
standard 10/100 Base-T Ethernet switch port (shown in
graphic). When connected to an 802.3af compliant
switch port (ex., POE8), LIP Phones and series
consoles can derive power from the Ethernet port.
When LAN power is not available, the optional AC/DC
adaptor must be used. The following image shows how
to connect the handset, power cord, and LAN cable to
the phone.
1.5.1 Phone Connections
The LIP-8012D and LIP-8024D each have 2 RJ-45 and
10/100 Base-T LAN connection ports (refer to following
graphic). One port is for connecting to the LAN (‘D’ in
graphic), and the other can be connected to a desktop
data device such as a PC (‘B’ in graphic), or another
LAN interface terminal (refer to iPECS Hardware and
Installation Manual).
To Next Page
Loading...
Need help?
General
