User Program Codes
http://www.LG-Nortel.com
• Press the [TRANS/PGM] button ▶ Press the flexible button to be programmed
• ▶ Press [Trans/Pgm] button again ▶ Enter the desired feature code below table
• ▶ Press the [HOLD/SAVE] button to save.
Delete Conference Room55
Create Conference Room54
Mobile-Ext. CLI PGM53
Mobile-Ext. Number PGM52
Mobile-Ext. Enable51
Set User Message42
Preselected MSG PGM41
SMS Message Protect36
Call Log Protect35
Register Password34
Walking COS33
Retrieve COS32
Temporary COS Mode31
Set BGM23
CO Ring Type Program22
View IP Address92ICM Ring Type Program21
MPB Version Display91Set Back Light18
View Keyset Version83LCD Time Mode Change17
View Mac Address82LCD Date Mode Change16
View IP Address81Language Program15
View Station ICLID72Reset Wake Up14
Register Station ICLID71Set Wake Up13
Headset Ring Program62Station Name Program12
Speaker/Headset PGM61Answer mode (H/T/P)11
FUNCTIONCODEFUNCTIONCODE
37
To Next Page
Loading...
Need help?
General
