LIP-8040L User Guide
32
or
88 + Line number (01-80 for iPECS-MG100, or
001-240 for iPECS-MG300).
CO/IP Group access—
801-820 for iPECS-100, or 801-872 for iPECS-
300 & 600
or
801-824 for iPECS-MG100, or 801-872 for iPECS-
MG300
Any CO/IP Line access—
9
When dialing on a CO line which uses pulse style
signals, you may activate Dial Pulse to Tone
Switchover changing to DTMF style dialing (for banking
services, etc.).
When placing an IP call, you must dial an IP address
using the ‘*’ key in place of the dot.
If Least Cost Routing is set-up, the number you dial
will be analyzed and the system will place the call on the
least expensive route.
You may be assigned Dialing and/or CO/IP Line
Access Restrictions, in which case you will receive
error tone if you attempt to dial or access a restricted
number/CO/IP line. CO/IP line and Station Class Of
Service (COS), which establish dialing restrictions, may
vary during Day and Night operation (Day/Night COS).
You may need to enter an Authorization code befor
e
placing calls, in which case you will receive a second
dial tone.
Your external calls may be subject to Call Time
Restrictions, you will receive a Call Warning Tone
prior to disconnect.
NOTE—In the event of an emergency, assigned
Emergency numbers (ex., a 911 call) may be dialed
from any station in the System, regardless of a
Station’s dialing restrictions (COS).
To Next Page
Loading...
Need help?
General
