To Next Page

To Previous Page

LIP-8040L User Guide

The CO code in a log item is used to seize the co line

when placing an external call using the call log. Up to 5

CO codes can be saved.

The first CO code is sent from the system in the saved

call log. Normally the first CO code is ‘9’, but if the

telephone number is equal to a number in the Speed

Dial list, the first CO code will be the access code of the

saved CO line of the speed dial. Therefore the first CO

code of each call log can be different and is not be

editable.

CO Codes 2 - 5 are the user-defined codes. If a code 2 -

is selected, the selected code will be used in placing all

of the external calls in the call log.

To select a CO Code:

 From the Call Log, use the right Navigation key, to

advance to the next 3 Soft button items,

01. ▶ CO1 01112345678

02. ◀ 101

03. CO2 LEE K D

04. ▶ KIM M J

05. 103

DEL CO CODE

 Press the CO CODE Soft button (code displaying the +

symbol is the currently selected item),

1. +88001

BACK EDIT SELECT

To save an external call to the Station Speed dial:

 Use Navigation up/down buttons to highlight the

desired external call item,

 Press the Select Soft button,

 Press the Save Soft button.

LG-Ericsson LDP-7008 D User Manual

Questions and Answers: