Shows dialed and incoming
numbers (where applicable)
and on the 7008D it will
display other information about
call status, dialing directories
and message information.
This button is used to initiate a
call transfer (TRS) or to enter
programming mode (PGM).
The last two (7004D/7004N) or
six (7008D) flex buttons can
be assigned outside line
presentation or as one-touch
feature access. (See codes at
rear of guide)
A station can initiate a call
back request to a busy station.
Once that station becomes idle,
the initiating station is signaled
.
The volume button adjusts the
audio levels for ringing,
handset and speakerphone or
OHD functions .
Microphone for hands-free
speakerphone function.
Loop Button(s) are required for
presentation of outside lines to
the telephone. At least one is
required per telephone.
LCD Display
Trans/PGM
Button
Flexible
Button
Call back
Button
Volume Button
Hand-free
Microphone
Loop Button
Item Description
Input/Output Devices and Button
5
To Next Page
Loading...
Need help?
General
