DESCRIPTION AND OPERATION
Page 31
Heater Hose Connection Revisions —
Beginning second quarter of 2004, a cooling
system revision was phased into production that
affects the ASET™ AC engine to move the cab
heater and optional fuel heater coolant return
hose connection point. This change relocates the
heater coolant return hoses from the thermostat
housing bypass area to a new location on the
radiator lower tube.
23
Figure 23 — Radiator Lower Tube with Welded Bosses (Spuds) for Heater Hose Connections
1. Fuel Heater Coolant Return
2. Cab/Sleeper Heater Coolant Return
3. Transmission Oil Cooler (If Equipped)
4. Draincock
5-111.bk Page 31 Monday, July 10, 2006 2:26 PM
To Next Page
Loading...
