CYLINDER HEAD
90-857046R1 NOVEMBER 2001 Page 4A-25
Camshaft Removal
1. Hold driven gear using tool (91-83163M) and loosen screw. Remove screw, washer,
driven gear and dowel pin.
NOTE: The camshaft can be removed from the top without removing the cylinder head from
the engine.
91-83163M
a
b
c
d
e
a-Holder 91-83163M
b-Driven Gear
c-Screw M8 x 40
d-Washer
e-Dowel Pin
2. Remove camshaft retaining pin and seal.
3. Remove oil seal and camshaft.
a
b
c
a-Oil Seal
b-Camshaft
c-Camshaft Retaining Pin with Seal
To Next Page
Loading...
