POWER TRIM
Page 5B-30 90-857046R1 NOVEMBER 2001
6. Use suitable punch to remove lower trilobe pin. Retain trilobe pin.
7. Use suitable punch to drive out lower pivot pin.
51144
51144
b
a
a-Lower Trilobe Pin
b-Lower Pivot Pin
Power Trim Disassembly
IMPORTANT: Power trim system is pressurized. Trim rod must be in the full “UP”
position (fully extended) prior to fill/drain plug, or manual release valve removal.
1. Remove reservoir cap.
2. Remove manual release valve assembly to drain oil.
55263
b
a
a-Reservoir Cap
b-Manual Release Valve
To Next Page
Loading...
