Mercury 40 FourStroke User Manual

POWER TRIM
90-857046R1 NOVEMBER 2001 Page 5B-41
Power Trim Reassembly
IMPORTANT: Lubricate all o-rings with Power Trim Fluid. If not available, use automo-
tive (ATF) automatic transmission fluid.
Shock Rod Reassembly
1. Install lubricated o-rings to end cap.
2. Install rod wiper.
3. Install lubricated o-rings to shock piston.
51199
f
d
e
a
b
c
51145
a-Rod Wiper
b-Inner O-ring
c-Outer O-ring
d-Shock Piston
e-O-ring
f-O-ring
4. Clamp shock rod in soft jawed vise.
5. Position cylinder end cap onto rod as shown.
51146

Mercury 40 FourStroke Specifications

General

Brand	Mercury
Model	40 FourStroke
Category	Outboard Motor
Language	English